Output Mappings editor serves for mapping input features (CAD Feature column) to PCF features which affect the resulting isometric, i.e. for the PCF features there are the source features set which the values should be taken from. If there are several mappings set for one PCF feature, then the one with the highest priority is used.
A mapping with lower priority is used in case that the CAD feature for the mapping with the highest priority is not available for the current item (pipe, fitting, etc.).
Higher number in the Priority
column means higher priority.
PCF
features can be selected from drop-down.
Feature
names are case sensitive!
To
set a standard file property, specific CAD property or other feature as
CAD feature it must be typed in special language independent form intelligible
to Smap3D Isometric. A list
of file properties and features with respective required forms is available here.
The output mappings editor form is composed of two tables.
The top table contains local mappings (user specific), the bottom one displays global mappings.
The global mappings are common for all the users using the same Smap3D Plant Design configuration folder (it is also where the IsometricGlobalRules.xml file is stored).
While the local mappings can be edited in the standard way, the global ones can only be copied from the local section or removed.
To copy a local mapping to the global options use Make global from the context menu.
